PR / Advertising Contact Me! Disclosure

DIY Playful iPod Holder!

23 Flares 23 Flares ×




With the swivel hook that snaps onto jeans or totes, your music will go where you go. You’ll want to make oodles for gifts or fashion accessories in today’s bright paisleys, polka dots, or florals. Plus, it’s easy to make with these step by step directions and diagrams!


  • 1/4 yard green print (bag fabric, lining)
  • 1/4 yard fusible interfacing 4 X 6″ rectangle batting
  • 3/4″-long swivel hook
  • 3/4″-diameter button

Step 1: Cut Your Fabrics

To make the best use of your fabrics, cut pieces in the following order.

From green print, cut:

  • 4 — 4 X 6″ rectangles
  • 1 — 4 X 41/4″ rectangle
  • 2 of Flap Pattern
  • 1 — 2-1/4″ square
  • 1 — 2 X 3″rectangle


From fusible interfacing, cut:

  • 2 — 4 X 6″ rectangles


From batting, cut:

  • 1 of Flap Pattern

Tip: A mechanical pencil always keeps a sharp point so it’s a good choice for marking placement lines on an applique foundation or tracing around templateson fabric

Step 2: Make the Bag Body

  1. Turn under 1/4″ on one short edge of green print 4 X 4-1/4″ rectangle; press. Turn under again 1/2″; press. Sewthrough all layers 3/8″ from second folded edge to make outer pocket (Diagram 1).
  2. Place outer pocket atop one green print 4 X 6″ rectangle, right sides up; baste (Diagram 2).Fuse a 4 X 6″ rectangle of interfacing to wrong side of one green print 4 X 6″ rectangle to make an interfaced rectangle. Repeat to make a second interfaced rectangle. (Using interfacing will help the bag retain its shape.)
  3. Referring to Diagram 3, join outer pocket piece to one interfaced rectangle along side and bottom edges to make bag body.
  4. To shape flat bottom for bag, at one corner, match bottom seam line to side seam line, creating a flattened triangle (Diagram 4). Measuring 3/8″ from point of triangle, draw a line across triangle. Sew on drawn line. Trim excess fabric. Repeat with remaining bottom corner to make bag body. Turn bag body right side out.

Step 3: Assemble the Lining

Referring to Assemble Bag Body steps 4 and 5, sew together remaining green print 4 X 6″ rectangle and interfaced rectangle, leaving a 2-3/4″-wide opening at bottom, to make lining. Do not turn right side out.


Step 4: Assemble the Bag Flap

  1. Fold green print 2 X 3″ rectangle in half lengthwise; sew together long edges with 1/4″ seam. Turn right side out and press to make button strip. Aligning raw edges, place ends of button strip side by side at bottom center of a green print flap piece (Diagram 5); baste.
  2. Place batting on wrong side of remaining green print flap piece; baste. Join two bag flaps together along sides and curved end to make bag flap. Turn right side out.
  3. Quilt as desired. Deb machine-quilted the flap of this portable media player bag with diagonal lines spaced 1″ apart.

Step 5: Assemble Swivel Hook Strap

  • Fold green print 2-1/4″ square in half; join long edges with 1/4″ seam. Turn strap right side out to make swivel hook strap.
  • Thread strap through swivel hook ring; fold strap in half. Baste ends together.
  • Align raw edges of strap ends along upper edge of bag back (Diagram 6); baste.

Step 6: Finish Bag

  1. Center straight edge of bag flap along upper edge of bag back atop swivel hook strap; baste.
  2. Slip bag inside lining, matching side seams; pin. (The flap, swivel hook, and strap are sandwiched between bag and lining.) Sew upper edges together.
  3. Turn bag right side out through opening in lining bottom. Slip-stitch opening closed. Insert lining into bag. Press upper edges of bag.
  4. Sew button on bag front.


Thanks, Better Homes and Gardens.

23 Flares Twitter 2 Facebook 13 Google+ 0 StumbleUpon 0 Pin It Share 8 Email -- Buffer 0 23 Flares ×
About Ashley

Ashley is mommy to an amazing princess, Maddilyn. She enjoys cooking, DIY projects, horse back riding, and taking her daughter to the beach, park and children's museum!

23 Flares Twitter 2 Facebook 13 Google+ 0 StumbleUpon 0 Pin It Share 8 Email -- Buffer 0 23 Flares ×